Tuesday, December 15, 2009

Fat Quarter Skirt Tutorial




It's here. After a few weeks of procrastinating and Christmas shopping, I finally managed to get this posted. This should fit a 2t-4t, but you might have to adjust measurements for the 2t. So here we go.


1st gather your materials

1 fat quarter

about a half a yard of coordinating fabric for waist and and trim pieces or another fat quarter

1 inch wide elastic



Because my camera got the swine flu and only seems to wanna work when all of the lights are off, there are few illustration and they're made my Microsoft paint.



OK now you cut your fabric. A fat quarter is usually about 21-22 inches that will be the width of the skirt. Now cut your fabric like this.

Now with right sides of the fabric together, sew the waist pieces, the skirt, and the ruffle together. Either serge or use a tight zigzag, the raw edges and press your seams.


Next, using your favorite form of gathering, gather the skirt to the width of the waist and the ruffle to the width of the skirt.
Then sew them all together and serge or zigzag edges and press seams. Now with right sides together sew the side of the skirt and once again serge or zigzag edges along with the top of the waist.




Next fold the waist piece in half, press it down and then top stitch leaving an opening large enough for the casing.

For the elastic casing your want to use a piece about 21-22 inches long depending on your child. I have a tubby toddler with a belly. She likes to wear things below it so sometimes I need a snugger fit. OK, now attach a safety pin to the end of the elastic and feed it through. Sew elastic together, top stitch the opening closed and lets hem the bottom.

The bottom of the skirt can be done whatever way you like it. You can hem it, serge it, lettuce edge it, whatever you like. Then you're done!!!






Sorry for the lack of pictures. Once I get a new camera I'll update the tute. If you have any questions feel free to ask.






0 comments: